Diferencia entre revisiones de «Especificaciones fabricación»

Revisión del 19:08 25 ene 2014

**Bill of Materials USB4Butiá**
Component	Quantity	Description
PIC 18F4550	1	microcontroller
Socket 40pin	1	socket for the microcontroller
RJ45 Female Jack	6	like http://www.metaltex.com.br/espanhol/produto/tfn1/tfn1-conector-modular-chaflanado-hembra-para-ci
USB Female Type B	1
ax12 female bus connector	1	molex WM18901-ND connector type
120R	1	resistor
390R	2	resistor
1K	2	resistor
10K	8	resistor
1M	1	resistor
22PF	2	resistor
0.1UF	4	resistor
0.47UF	1	resistor
electrolitic capacitor 10UF, 25V, 20%	1	lower than 7mm
Led 3mm	1
20MHZ crystal	1	height 0.138" (3.50mm)
4.3mm switch	2
Female Header	11

**Bill of materials for USB4Butiá motor shield**
Component	Quantity	Description	PCB Identifier
L298HN	1	HBridge	U1 L298
1A7	8	diode	D1..D8
male headers	14	pin	P1..P4
100nF (10V minimum, 20% tolerance)	2	ceramic capacitor	C1, C2

**Bill of Materials allselasercut**
Component	Quantity	Description
5555167-1	5	Rj45 female jack like http://www.metaltex.com.br/espanhol/produto/tfn1/tfn1-conector-modular-chaflanado-hembra-para-ci
Socket 40pin	1	socket for the microcontroller
RJ45 Female Jack	6	like http://www.metaltex.com.br/espanhol/produto/tfn1/tfn1-conector-modular-chaflanado-hembra-para-ci
USB Female Type B	1
ax12 female bus connector	1	molex WM18901-ND connector type

each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar

@@ Línea 56: / Línea 56: @@
 |-
-|L298HN|| 1 ||HBridge
+|L298HN|| 1 ||HBridge||U1 L298
 |-
-|1A7||8||diode
+|1A7||8||diode||D1..D8
 |-
-|male headers||14||pin
+|male headers||14||pin||P1..P4
 |-
 |-
-|100nF (10V minimum, 20% tolerance)||2||ceramic capacitor
+|100nF (10V minimum, 20% tolerance)||2||ceramic capacitor||C1, C2
 |-
 |}